Priming Slurry Bond BAL

This product is a highly polymer modified cementitious slurry primer engineered for fixing natural stone and porcelain tiles or pavers in external areas onto BAL BEDDING MORTAR to the requirements of BS 7533 or as a bonding slurry onto a mature concrete base. It is grey in colour and is supplied in 20kg bags.

Product Suitability

This product is suitable for the applying to the following;

External Porcelain Tiles

Natural Stone Paving

Preparing backgrounds for recieving mortar beds

External floors installed as per BS 7533-4

Please be advised that this product is NOT suitable for total immersion, internal use, conventional tiling or on vertical planes.

Coverage

At 2mm thickness, this 20kg pack of BAL Priming Slurry Bond typically covers approximately 8m2.

Please be advised that coverage may vary dependent on nature and flatness of surface and thickness of application.

Benefits

This product offers the following benefits; Excellent bond strength between base and pavers or tiles. Fast and easy to use. Only requires mixing with water.

Application Instructions

Please download the product data sheet in the 'Downloads' tab to review the manufacturer's technical detail and installation requirements prior to purchase. McMonagle Stone is solely a distributor of this product. We are not liable of inaccurate calculations or misuse of this product. We recommend enlisting the support of a reputable and experienced contractor to carry out check suitability and quantities prior to order and carry out installation to ensure safe and successful application.